Hi Fashionistas!

I have been meaning to film this quick video on how to draft a petal sleeve or tulip sleeve, but for some reason, it’s taking the longest.  I’ve been trying to film overhead so I can give you the best possible angle so you can see the pattern making. I’ve also been trying out new equipment like a new audio recorder. To be honest, I am not very tech savvy and even editing a video in I movie intimidates me! So I am back to doing it the simple way. I took a bunch of pictures and I will just walk you through it! It is very easy!

Before we jump in, let’s have a look at a sample I made from the pattern I drafted for this demo. A petal sleeve is a two piece sleeve where you as the designer chooses whether the back overlaps the front, or whether the front overlaps the back.  You can see examples of both below

 

Now let’s jump into the drafting!

Step 1: Take any basic sleeve. If this is your 1st time drafting a petal sleeve, pick a basic sleeve that does not have much design detail. In other words, stay away from a sleeve that already has gathers, tucks, pleats etc..

Before we move forward, let us look at the anatomy of the sleeve. As you can see below, we have the double notch indicating the back of the sleeve, the single notch indicating the front of the sleeve, the grain line and also the shoulder notch. The shoulder notch is the location where the sleeve connects to the shoulder seam on the bodice. On commercial patterns, you may see a circle instead of the shoulder notch.

Step 2: Trace 2 copies of your sleeve pattern. If you have a needlepoint tracing wheel, you can use this to trace. If not, you can also place a semi-opaque paper on top of your original pattern and trace it that way.

Be sure to copy the notches onto the copies of the sleeve.

Step 3: Measure 2-3 inches out from the shoulder notch along the shoulder cap and mark a new notch. I have shown that in black. We will be creating the back petal sleeve in this step

Using either free handing or a french curve, connect the corner where the side seam and the hem meet to the black notch on the opposite side of the sleeve as shown below.

Cut along this curved line. This below is now your back petal of the sleeve. The double notch on this patterns indicates the back of the sleeve.

Step 4:

Flip the piece you just drafted on step 3 and place it on the 2nd copy you traced in step 2.    Now trace the curve on the 2nd copy of sleeve as shown below:

Cut along the newly traced line.

This is the front of the sleeve.

 

Now if you match the sleeve front and the sleeve back at the shoulder seam, you have a brand new petal sleeve! Be sure to copy the grain line over to both pattern pieces!

That is pretty much it!

If you overlay the 2 new sleeve pieces on top of the original sleeve you traced from, you will notice that it matches perfectly. The fit of the sleeve is not impacted by this pattern changed and you can decide whether you want the front to overlap the back or for the back to overlap the front!

Sewing Tip: If you are using a knit, you can hem the petals individually as you would normally hem a knit by turning it under. If you are sewing with a woven, I highly recommend lining the sleeve for a clean finish. You could self-line or line with an interesting bright fabric or print lining for a pop of color!

Here is a sample I sewed up with this pattern:

 

I hope you enjoyed this and found it helpful. Now IF I figure out how to work this monstrosity of a gadget below, I will turn these images into a quick slide show and do a voice over and make a quick video for those of you who are like me and get confused by a lot of words.

 

Talk soon Fashionistas. Let me know. did you find this helpful? What else would you like to see?

Thanks!!

Vatsla 🙂

13 Comments on How to Draft a Petal Sleeve : Tutorial

  1. Thanks for this tutorial and recommendation to line the petal sleeve as I’m preparing my pattern M7542 now view (A) with the petal/tulip sleeve and a lined sleeve would look sew much better, love your tutorials thanks.

  2. Your tutorials are always fantastic. They can be understood perfectly. Thanks a lot. Make more: the more the better. 🙂

  3. Thanks for the great tutorial, I love the look of petal sleeves! I love your style and appreciate you sharing with us. Hope your figure out your gadget. I looked on youtube and there are lots of tutorials on how to use it, hope you find one that helps for I too get cross eyed when there are too many words! I’m a visual learner and that’s why I really appreciate your tutorials.
    Miriam

    • HI Miriam!

      Thank you so much for your sweet comment! Yes, I will default back to YT when I am really ready to start using it!

      I’ll be posting another sleeve tutorial soon of something I have made.

      Thanks!
      Vatsla

1Pingbacks & Trackbacks on How to Draft a Petal Sleeve : Tutorial

Leave a Reply