Hi Everyone!

Looks like Tuesdays might end up being “Tutorial Tuesdays”. A few days ago, a fellow sewist shared this picture and asked how she could draft the peplum for  a blouse.  I have documented step by step instructions below on how to draft a peplum.  Peplums are really easy to draft and you need only one measurement: your waist.

azz56663_cream_default_xl

 

First of all I want you to think of a peplum as a baby version of a circle skirt, because that is essentially what it is. A peplum sits on the waist and looks most flattering when worn on the natural waist, which is the smallest part of the torso. The natural waist for most women is slightly above the belly button.

Some more examples of peplums….

43bc2294a28c6cd4b6c33dd83be0b98b

And here is the famous Victoria Beckham Sheath dress that you can buy for $3145… or you can learn this DIY and make your own!

celebrities-victoria-beckham-fall-2009-carmontelle-cashmere-peplum-dress

Peplums are found on blouses, dresses, skirts, jackets and come in all shapes and sizes. I have seen peplums with gathers, box pleats, inverted box pleats and many more variations.

Follow the steps below to draft your very own peplum! I  took this pictures in a rush, so excuse the free hand sketching. It’s not fancy, but if you understand the technique, then that is all the matters!

behindseams2

You will need the following measurements: waist (Measurment A) and desired height of peplum (Measurement B) ,Pattern paper, tape, scissors and drafting pens or pencils.

Step 1: Draw a rectangle using measurement A and measurement B

IMG_6525Then draw lines shown in blue that are somewhat equidistant.

IMG_6526Step 2: Cut along the blue lines almost to the top, but don’t cut all the way. This allows you to spread the pattern.This is called the Splash and Spread Method

IMG_6529

 

Step 3:  Tape down the original pattern at the top. This is still our original waist measurement. On the bottom of the pattern, you will start spreading the pattern as shown below. You could insert one inch in each opening, or 2 inches for a fuller peplum. Tape down the bottom of the pattern after you have spread it.

 

IMG_6530

 

If you want a fuller peplum, you can spread the pattern even more as shown here

IMG_6533

 

Step 4: Next add seam allowance so this can be sewn up properly. Also add a hem on the bottom. I have shown this in red. This is the pattern for the front of the peplum

 

IMG_6531

 

To draft the back, all you have to do is fold the pattern above in half and add a seam allowance along the centre back to accomodate the zipper.

IMG_6534

 

Hi-Lo Variation:If you are going for a hi-lo peplum in the back, you can simply extend the centre back by your desired measurement (green line) as shown below before adding the seam allowance (shown in red)

IMG_6535

It was fun making it and trying out a different kind of peplum, but I think I will go back to my favorite style, which is this white one and this blue one, that I left drafted using this tutorial. If you want your peplum to have a stiff hem like my white peplum below, consider sewing in some horse hair braid to the hem. I used a one inch HHB you can find HERE

 

IMG_8471

 

IMG_6658

Want to learn more about pattern making in a way that makes sense? Check out Suzy’s pattern making classes HERE. Suzy is brilliant. I learned everything I know about pattern making from her.

I hope this helped! If you have any questions, leave a comment and sign up for more sewing tips and tricks below!

-Vatsla 🙂